|
Programmable Logic Controller (PLC) is used to specify or program the various parameters used by the Belt Impulse Cutter to cut belts without ‘spiders’. The Human Machine Interface (HMI) device shown in the photos below permit on screen data entry for each parameter. Although the HMI device will permit you to change the proprietary code used by Novaseal to program the function of the PLC, we highly suggest you don’t change the code. As a matter of fact, changing the proprietary code will void our warranty. If you require code changes, we strongly suggest you send your requests to Novaseal and we will consider making changes to the code and forwarding to you instructions on how to upload revised code.
Factory default values for T4 and T9 provided the best results in cutting belt material supplied to Novaseal during the testing/calibration phase of machine fabrication. Since it is possible that default values may change by environmental condition or if materials are changed, you may need to change values for T4 and T9. To do that, please follow the instructions defined in the video below. For screen shots of PLC, click here.
|
