Novaseal Custom Pouch Sealer was shipped from our Coconut Creek, Florida location on Friday, May 29, 2015. Shipped via FedEx Freight Priority ground service (insured). Click here to view BOL. Crate measured 45 x 33 x 35in Height. Movement of the crate can only be facilitated by using pallet jack or fork lift where indicated on the crate.
In removing crate materials, please start by removing the top sheet of wood. Top side has the address label affixed to it.
Once the top lid is removed, look for the identifiable components as shown in photo to left. Pouch Sealer is in the center of the crate. Sample Die is packaged in a cardboard box and wedged between Pouch Sealer and crate wall. Secured with a wood screw holding box in place. Under the Pouch Sealer is a wood mounted second die (Double Straight Die).
Next remove rest of crate materials. On left and right end of Pouch Sealer is set of 3 Table Mounting holes. At least 5 of these Mounting holes were used to secure Pouch Sealer to crate floor. Screws are hex head and can easily be removed with socket wrench.
