Main Menu. The Main Menu screen is the screen seen when the POWER switch is turned ON. This screen allows you to access Temperature SetPoint, Heat Status switch, Setup, and Contact information.
To change Set Point Temperature, locate Set Point Temp on Main Menu, then touch the box showing Set Point temperature. Referring to photo inset above, touch the box showing 225. When touching this box on the Human Machine Interface (HMI) either on this page (above, photo inset) or on your Custom Pouch Sealer, another window opens that allows you to enter a set point value. Maximum value is 500 deg F.
Touching the “Heat ON” button will turn on the heat. Touching the “Heat Off” button will turn heat off.
Touching the Main Menu button will bring you back to this page.
